Welcome Guest, Not a member yet? Create Account  




NTP issues VyOS 999.201711232137

#1
(This post was last modified: 03/12/2017, 23:44 by keithl.)

I was running 201711072137 and NTP would not start. After every reboot I would have to run "sudo systemctl restart ntp" and then all the NTP results woudl show up. Now on version 201711232137 when I start NTP evevn after hour sthe only results I get for show NTP is :

admin@vyos:~$ show ntp
     remote           local      st poll reach  delay   offset    disp
=======================================================================
=::ffff:132.163. fe80::92e2:baff 16 1024    0 0.00000  0.000000 3.99217

Looks like it is only doing IP v6?

If I do a delete system ntp and then re-add it all looks good again;

admin@vyos:~$ show ntp
     remote           local      st poll reach  delay   offset    disp
=======================================================================
=132.163.96.3    192.168.1.68     1   64    1 0.05206  0.097909 0.66148
=132.163.96.4    192.168.1.68     1   64    1 0.05302  0.096290 0.66147
=::ffff:132.163. fe80::92e2:baff 16   64    0 0.00000  0.000000 3.99217
*129.6.15.28     192.168.1.68     1   64    1 0.02727  0.103166 0.43311
=129.6.15.29     192.168.1.68     1   64    1 0.02719  0.101712 0.43307

included the support bundle.

Attached Files
.gz   vyos.tech-support.2017-12-03-164239.txt.gz (Size: 83.18 KB / Downloads: 0)
Reply





Users browsing this thread:
1 Guest(s)