Welcome Guest, Not a member yet? Create Account  




Question Installation problem on PCEngines APU2C4

#1
(This post was last modified: 29/11/2017, 17:34 by m0nkey_.)

Hello all.

First post on the forum.

I've been trying to install VyOS 1.1.8 on a PCEngines APU2C4, following the guide at https://wiki.vyos.net/wiki/Network_appli...nes_APU2C4 but seem to hitting a wall.

I've successfully created the ISO image as laid out in the steps, confirmed the generated ISO boots by running it in a VM, written the ISO to a SDCard (even tried USB stick). I get the syslinux boot explaining to login as vyos/vyos and how to install the image. Once it passes that, I see exactly one kernel message then it appears to hang. The last message I see is "i8042: No controller found".

Any suggestions or ideas I can try to get VyOS to boot?

Update:

Here's the serial output from a VM to confirm it's working:


Code:
ISOLINUX 4.02 debian-20101014  Copyright (C) 1994-2010 H. Peter Anvin et al

*************************************************************
*                                                           *
* Welcome to VyOS, an open source network operating system! *
*                                                           *
* Version: 1.1.8 (Helium)                                   *
*                                                           *
* Default login:    vyos                                    *
* Default password: vyos                                    *
*                                                           *
* To start installation, login and use command:             *
*     install image                                         *
*                                                           *
*************************************************************

Press control and F then 1 for help, or ENTER to
boot:
[    1.877635] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    1.879885] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    1.881046] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.722180] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!

Welcome to VyOS - vyos ttyS0

vyos login:
Reply





Users browsing this thread:
1 Guest(s)